The Hornady Lock-N-Load Classic Reloading Kit comes with everything you need to turn out high-quality, accurate handloads. You get everything listed here, plus complete instructions. The Hornady Handbook of Cartridge Reloading is especially valuable, with hundreds of rifle and pistol loads for every shooting application.
- Lock-N-Load Classic single-stage press
- Lock-N-Load Powder Measure
- Electronic Scale
- Powder Trickler
- Funnel
- The 9th Edition Hornady Handbook of Cartridge Reloading
- Three Lock-N-Load Die Bushings
- Primer Catcher
- Positive Priming System
- Hand-Held Priming Tool
- Universal Reloading Block
- Chamfering and Deburring Tool
- Primer Turning Plate
- One Shot Case Lube
Low T-1 Mount For TRS-26
The Bushnell T-1 Aimpoint™ style low-rise mount is perfect for using the TRS-26 in a lower mounted configuration such as on a drop-comb stock such as a rifle or shotgun, or even handguns with mounting rails. On the TRS-26 it lowers the optical center height from 1.53 inches down to 1.07 inches. It also works for anybody looking to mount a T-1 compatible optic lower.
This low T-1 mount measures only 4.4mm tall from rail top to mount cradle, is made of 6061-T6 aluminum, is black anodized, and comes with a steel clamp-bar and 4 T15 screws to secure it to your optic, and since it has a single crossbolt it works on both Weaver and Picatinny style rails.
Weaver and Picatinny Rail Compatible
Our Low T-1 Mount will work on both Weaver and Picatinny rails for maximum compatibility on whatever you want to mount it on.
Opens Up Optic Firearm Possibilities
This Low T-1 Mount is only 4.4mm high from the top to the mount cradle making it so you can use optics on firearms with traditional stocks and comb heights to give you a proper cheek weld - No more reaching and hunting to find the dot.
- Lower mounting height of TRS-26 Red Dot Sight from 1.53" down to 1.07".
- Makes the TRS-26 and other high-rise T-1 compatible sights usable on traditional comb rifles and shotguns.
- Measures only 4.4mm from rail top to mount cradle.
- Made of 6061-T6 aluminum.
- Uses a steel clamp-bar with a single crossbolt for use on both Weaver and Picatinny rails.
- Includes 4 T15 steel screws and T15 L-Key for mounting to optics.
- Compatible with T-1 mounts.
