Choke Tubes

Brand new Triple Shot Technology (TST). TST is a series of three graduated rings in the taper section of the choke tube that allows a more gradual transition from the shotgun bore to the final constriction.

Manufactured from a 304 high stress stainless steel. Each choke tube protrudes .625 to 1.3 inches from the end of the barrel depending upon which type of firearm the choke tube has been specifically designed for.

Designed for the coyote hunter who wants devastating knockdown power upward of 70 yards. For use with Hevi-Shot, Bismuth, or lead.

Made from 17-4 heat treated stainless steel, these chokes are for the Winchester, Mossberg 500, Browning Invector, Weatherby, and Savage 12 gauge and 20 gauge shotguns.

Manufactured from 17-4 heat treated stainless steel. These chokes may be used with lead shot on any constrictions.

Made from 17-4 heat treated stainless steel, these chokes are for the Beretta/Benelli Mobil shotguns.

Designed to shoot all lead and Hevi-Shot loads, knurled loads, knurled end. 25% longer parallel section to help produce very tight patterns.

High quality flush mount replacement for Browning Invector Plus is made of high quality stainless steel. These chokes are stainless and steel shot compatible through full choke construction.

Manufactured from 17-4 heat treated stainless steel. These chokes may be used with lead shot on any constrictions.

These chokes feature Carlson's brand new Triple Shot Technology. TST is a series of three graduated rings in the taper section of the choke tube, that allow a more gradual transition from the shotgun bore to the final constriction. Fits most Remington.

Carlson's TSS Turkey Choke Tubes are optimized for Federal Premium Heavyweight TSS Turkey Loads, but also work exceptionally well with other manufacturer's turkey ammunition (smaller shot size 7-9).

Manufactured with 1704 Stainless Steel, Carlson's Waterfowl choke tubes feature a longer parallel section allowing for less flyers and denser patterns.

Stainless steel. Extended knurled end. Ported. 12 gauge. Modified to full. Fits Browning Invector/Win and more. Steel, lead, copper and lead combination or Hevi-Shot compatible.

Fits Berretta Optima HP 12 gauge choke systems. Improved cylinder/.723 constriction. Made from 17-4 heat-treated stainless steel with non-glaze matte finish.

Carlson's Ported Buckshot choke tube is designed to give you tight patterns downrange with 00 & 000 buckshot. This choke reduces recoil and muzzle jump that tend to go hand in hand with these large loads.

Carlson's fastest choke wrench allows you to remove and insert chokes in just seconds. They are easy to operate using only your index finger and thumb.

Designed to give you tight patterns downrange with 00 & 000 buckshot. Reduces recoil and muzzle jump that tend to go hand in hand with large loads. Features a constriction designed specifically to optimize patterns with large and small loads alike.

Combo includes a TRUGLO Magnum Gobble-Dot Sight and a TRUGLO Gobble-Stopper Xtreme Choke Tube. In-line 3 dot sight mounts on rib. The choke tube is machined from high-grade steel and is ported to reduce recoil. The choke tube accepts all turkey loads.

Internal grooves improve patterning. Optimum construction for tight, dense patterns. Precision CNC-machined. Accepts all turkey loads including Hevi Shot.

The TSS Jelly Head allows hunters to have a super-tight, evenly spread pattern allowing the accuracy to kill even the toughest of gobblers. Enjoy the ease of installing and removing the new TSS Chokes without any tools.

Designed for lead and copper plated shot in 12 and 20 gauge shotguns. Features blued finish, 3"long tube. Knurled end for easy hand installation.

Carlson’s Cremator Choke Tubes feature brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions.

This Cremator series choke tube is designed with a 25% longer parallel section for tighter and more dense patterns. This choke tube includes a standard choke wrench.

An incredibly high pellet count in both 7 and 9 shot, along with the ability to carry energy further, makes them ideal for 12 and 20 gauge.

Carlsons Cremator Choke Tubes feature brand new Triple Shot Technology (TST) and is offered in close mid and long range constrictions.

This new ammunition features Shot-Lok Technology that allows for the tightest patterns and longer downrange reach over any lead turkey load on the market.

This Cremator series choke tube is designed with a 25% longer parallel section for tighter and more dense patterns. This choke tube includes a standard choke wrench.

Extends beyond end of barrel for easy removal and even tighter patterns. Proprietary differential banded gas seal eliminates residue build up and makes chokes easy to remove and install. From skeet to full choke, patterns tighten consistently and reliably.

Stainless steel with black oxide finish. Rifled design is extremely effective with both sabot and Foster slugs. Threaded for 12 gauge Invector-Plus back-bored barrels only. 17-4 stainless steel.

Integrated spring suspension holds the seal tight, yet allows expansion against the barrel wall for a perfect fit and a smooth transition for the shot column entering the choke. Gas is controlled at the interface between choke and location in the bore.

For use with steel, lead, or Hevi-shot, these chokes are made of 1704 heat treated stainless steel. Steel or lead shot may be used in these choke tubes. Steel shot larger than #BB should not be used in any choke tighter than modified.

Investor Plus choke tubes come standard in all Browning back-bored barrels. Investor Plus and back-boring work together as a team. The longer choke taper inside an Investor Plus choke tube combined with back-boring produces patterns with uniform densities.

The Carlson's Remington 20 Gauge Flush Choke Tubes is perfect for the shooter who is currently unsatisfied with their shot patterns. Manufactured from 17-4 heat treated stainless steel, these shotgun chokes are built to be durable and long lasting.

These precision Rifled Choke Tubes are manufactured from 304 high stress stainless steel. Each choke tube protrudes .625 to 1.3 inches from the end of the barrel depending upon which type of firearm the choke tube has been specifically designed for.

Carlson's Cremator Ported Choke Tubes come with a long-range choke, mid-range choke, and a free wrench ensuring that you're set up for a variety of hunting scenarios.

This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.

The Carlson's Sporting Clays Choke Tubes are made from 17-4 stainless and precision machined to produce a choke tube that patterns better than standard choke tubes.

This design offers reduced pellet deformation, less flyers and more dense patterns. These benefits make the Cremator Series extremely effective on all types of waterfowl throughout the entire season.