The GrovTec Sling Swivel Set includes mag cap replacement with swivel stud, 3/4" wood screw rear swivel stud and one pair of GT locking swivels.

The pain-free, screw-on polymer handle of this ramrod is made to stay installed on the ramrod and gun, even while carrying or firing. The ramrod’s solid-aluminum construction and 4" jag extension double as a range/cleaning rod.

Hard-working synthetic lubricant protects the threads of muzzleloading breech plugs as well as shotgun choke tubes. Withstands high operating temperatures and prevents fouling or powder residue from binding the parts.

Bergara ST1 (Self Timing) Muzzle Brake - .30 Caliber The ST1 employs an angled baffle design that applies downward pressure while not venting gas into the line of sight or increasing ground disturbance. This results in a drastic reduction of felt recoil as well as minimal muzzle rise

Showcasing a quality brass tube, with an included spring and follower, this tube assembly is perfect as an immediate replacement piece and will keep your Henry rifle in top operating and reliable condition.

QRBP is short for quick removable breech plug. Once fitted to the barrel of the rifle (requires a special fitting tool that is provided), no tools are required to install or remove it, making take down for cleaning a snap.

Made from durable, heavy weight elastic, and fits snugly to the buttstock of your shotgun. Does not interfere with holding or aiming the shotgun. Holds 5 shotgun shells reliably in place when you need them.

Provides a truly ambidextrous offset for your thumb to safely set hammer condition. For use when there is limited thumb access between the scope and hammer.

The Carlson's Auto Catcher Shell Catcher for Semi Auto Shotguns features an all-steel design, preventing empty hulls from being ejected. The shell catcher retains them for you for easy removal. This model fits most semi-auto 12 and 20 gauge shotguns.

Fits all 1851, 1860 and 1858 revolvers. Nipple pick attached to brass cap.

Significantly reduced in size from the MBUS, this sight sits at just 0.55” high when folded, 1.38” at its widest point, and weighs a scant 30 grams with hardware.

Magnum Musket Nipple for use with musket caps. The Thunder Nipple uses an 8mm thread that tapers at the end to lock into the Thunder Dome Breech Plug. This magnum ignition system assures you a torch-like flame to ignite the powder.

This pistol keeper gives an extra level of security, while still allowing full extension for tactical situations. Made with coiled wire and black rubber external laminate.

Made of heavy-duty polyester, this convenient rifle shell holder has adjustable Velcro straps to secure it to the butt stock of your rifle. Its suede cheek piece adds comfort and protects the stock of the gun.

Reduces recoil by as much as 58% and improves accuracy. The brake locks into position using external jam nut. This muzzle break installs quickly using a 7/8″ box wrench or crescent wrench, and is manufactured from alloy steel with a matte black finish.

Fits Traditions rifles and pistols with M6 x 1. Fits Traditions and CVA Black Powder Guns. An upgrade on your Traditions muzzleloader.

The Traditions Supreme Loading Jag is designed to load polymer tip, lead tip and hollow point bullets without damaging the tips. For .50/.54 cal.

Beartooth’s Comb Raising Kit is the easiest and most effective way to increase gunstock height. If your shotgun shooting accuracy suffers due to improper gun fit or you need help finding the cross-hairs on your rifle’s scope, this is the solution.

Fits most rifle barrels .30 caliber and smaller with a 5/8"-24TPI or 1/2"-28 TPI threaded muzzle. Barrel shoulder must be at least .700" to install.

Multi-caliber design fits most rifle barrels .30 caliber and smaller with a 5/8"-24TPI or 1/2"-28 TPI threaded muzzle. Barrel shoulder must be at least .700" to install.

Multi-caliber design. Fits most rifle barrels .30 caliber and smaller with a 5/8"-24TPI or 1/2"-28 TPI threaded muzzle. Barrel shoulder must be at least .700" to install.

This muzzle brake was designed for the Franchi Momentum with a barrel thread pitch of 5/8"x24TPI and is suitable for .30 cal and under.

High power daylight visible red laser and a high-strength magnetic connection to the barrel to deliver fast accurate bore sighting. This system works with virtually all firearms.

Rail fits firearms with factory pre-drilled receivers. Includes three screws.

The Bore Driver FTX bullet incorporates an InterLock ring that helps retain bullet weight upon target impact that when coupled with a strengthened copper-alloy jacket delivers maximum penetration and expansion for the ultimate big-game performance.

Traditions #209 Brass Primer Capper for Muzzleloaders holds twelve #209 primers. Just squeeze the lanyard loop to remove from body, load primers and replace lanyard loop.

The Umarex Co2 Adapter allows airgun shooters to use two 12 gram CO2 cartridges in place of one 88 gram tank on most 88-gram Co2-powered airguns. They offer shooters more flexibility, especially when only wanting to take a few shots.

This Umarex 88 gram Co2 Saver Adapter means no more wasted Co2 because it allows for the removal of a partially-full 88/90 gram cartridge thanks to a special valve on the adapter that automatically closes when not in an airgun.

Designed to work exclusively with the Ruger PC Carbine. It accepts all Glock 9mm magazines. The flush-fit design is made from rugged, glass-filled polymer material for strength and durability.

The T&S Shell Catcher catches single shotgun empties and allows you to save them for reloading. They prevent empty shell from being thrown towards the next shooter and stops empty hulls in the ejection port at an angle that allows for easy removal.

Once installed, this device captures single cartridge cases as they are ejected from a firearm allowing you to save them for reloading and prevent empty shells from being thrown. Easy to install and remove for either singles or doubles.

This Optic Adapter Plate supports the use of Burris FastFire and Vortex Viper/Venom red dot sights on the Ruger-57 pistol. The plate is precision CNC machined from 6061-T6 aircraft aluminum with a matte black hardcoat finish for strength and durability.

Seal the rear of your muzzleloader's barrel with a CVA quick-release breech plug. Made for 2010 or newer CVA Accura, Optima and Wolf muzzleloaders, for both standard powder or pellets and modified for Blackhorn 209 powder.

These pivoting Bi-pods feature innovative traversing technology enabling you to horizontally rotate back and forth for a steady hold on moving game.

Medium, deluxe field recoil pad (5.40"Hx1.90"W). 1.10" thick. 3.10" hole. Rounded for quick mounting. Non-slip, stippled surface. Grind to fit. Gunsmith installation recommended.

Integrated Picatinny rail. Storage compartment in grip. Includes installation tool. Machined aluminum. Hard anodized rail grabber.

The Sako/Tikka Tactical Conical Muzzle Brake is designed for .30 caliber or smaller bore rifles from Sako and Tikka. The muzzle brake can be affixed to rifle barrels that feature 5/8-24 threading and helps eliminate recoil, muzzle rise, and flash. The asymmetrical design reduces dirt and dust kick-up when firing from the prone position.

This IMI Defense quick detach 0.75” and 1” Light Mount TLM is a lightweight construction and gives a secure and stable platform to mount flashlights. Made of high quality fiber reinforced polymer compound material to stand up to the rigors of duty.

The Bi-pod adaptor quickly and easily attaches to a picatinny rail. Any standard bipod or sling can then be attached to the integrated swivel stud. A curved "fore-end style" profile assures the perfect fit for the bipod to mate with.

This adapter gives your 12 gauge single or double shot break open shotgun the ability to fire a 9mm bullet (standard 9mm Luger - 9x19).  Precision machined from high quality stainless steel to the OD specifications of a 2-3/4 20ga shell plus.

This adapter gives your 12 gauge single or double shot break open shotgun the ability to fire a 22LR bullet. This adapter is  precision machined from high quality stainless steel to the OD specifications of a 2-3/4 12ga shell.

This adapter gives your 12 gauge single or double shot  break open shotgun the ability to fire a 22LR bullet.  Precision machined from high quality stainless steel to the OD specifications of  a 2-3/4 12ga shell.