Oval head machine screws have a countersunk head with a rounded top surface and a cone-shaped 82 degree bearing surface.

Type III hard anodized finish. Steel stud with black oxide finish. M-Lok mount system. Hardware included. Fits locking swivels.

Optimize your length of pull with this OEM spacer kit, designed to provide the operator with optimized recoil reduction that utilizes the ergonomic and customizable features of the Lupo rifle systems.

Compensator for 92 Series threaded barrels. Compensator specifically designed for 92 series pistols equipped with threaded barrel, it has side and upper vents to stabilize the weapon during firing by deflecting the gases.

All steel construction. Fully rotational base. Black oxide finish. Includes 2 adaptors. Simply attach the adaptor to the swivel stud use your favourite push button sling without drilling into a stock or sewing on new swivels.

This simple device drastically aids in weapon control by offering a secure thumb location on the rail. It increases accuracy by providing a simple indexing point for consistent grip and improves manipulation. It even aids in finding a solid barrier rest.

Made from durable, high quality polymer, the black buttplate features a raised Browning logo and rough texture. Two screws are required to secure the buttplate to the stock.

Mag plug for reducing capacity of tube mag shotguns for hunting. Cut to proper length.

Fits on the side of the receiver or forend. Compatible with most 12 gauge Turkish pump and semi-auto shotguns.

Crush washers are great for replacing your used ones and for installing a new muzzle device onto your AR.

These sling swivel studs are designed to allow the user to attach accessories such as slings and bipods to their firearms. These studs provide a solid platform which will enhance accuracy.

Compatible with most 12 gauge Turkish pump and semi-auto shotguns with tubular magazine.

Gen 3-4. OEM factory slide stop lever for the G17, G17L, G19, G22, G23, G24, G25, G26, G27, G31, G32, G33, G34, G35.

Glock 47249 slide stop lever and spring, extended, 9mm, G17 Gen 5, G19 Gen 5, G19 Gen 5.

This steel bolt handle comes in a black finish.  The bolt features a non-rotating paddle head with knurling to prevent slipping when used.

For gunsmithing purposes.

The premier Glock trigger kit for competitive shooters seeking to attain the ultimate performance. It has an adjustment screw built into the trigger pad for fine tuning the pre-travel and over travel of the trigger for personal preference. .

ZEV Technologies PRO Mag-well 1st-4th Gen Glock aluminum one-piece design in a matte black, smooth anodized finish. Includes mag-well, screw and wrench.

The GrovTec Bipod Stud Mount is for KeyMod mounting systems. Constructed from 6060 T-6 Aluminum with a black type III hard anodized finish. Designed to fit Harris style bipods and includes the hardware for mounting.

Significant MIL upgrade. MIL take-up/pre-travel. Very smooth. No-flinch break. Semi-auto single-stage. Curved trigger with a backbone.

Designed for the professional shooter who is looking to enhance the look and performance of their Gen5 Glock. The 1-piece design facilitates easy installation and utilizes a single attachment screw to securely mount to the Glock frame.

The ZEV Pro Plus Magwell was designed and tested for compatibility with standard capacity factory magazines as well as magazines fitted with ZEV basepad magazine extensions. It also incorporates a pass-through hole at the back for lanyard retention.

Designed to attach to any standard picatinny rail. It provides you with a sling swivel stud which will allow you to mount most bipods. The adapter will clamp on very firmly and maintain a strong hold providing you with stability.

The ZEV titanium slide lock lever is machined from uncoated titanium and fits Gen 1 through Gen 4 Glock models.

Designed for the professional shooter looking for a larger opening than the standard PRO version, it also incorporates a pass thru hole at the back for lanyard retention. Will fit both Gen 3 and 4 Glock frames which features a solid 1-piece design.

Designed with an aggressive rearward angle and a non-slip textured face that matches the factory finish of your Gen 4 grip. This mag release is a drop-in replacement part. Not compatible with Gen3 models.

Features a textured oversized head allowing shooters to access it without shifting grip. Both the Mag Button and the Mag release are aluminum rather than factory plastic. Not designed for Generation 4 Glock models.

Extended tip eliminates light primer strikes for complete reliability, even with hard primers. Fits Glock 9mm Luger, .40S&W, .357SIG.

ZEV Technologies stainless steel recoil spring guide rod for standard frame size Glock pistols. (Compatible models listed on Tech Specs page.) ZEV Guide Rods are NOT Compatible with Glock Factory Guide Rod Springs.

3/4" wood screw swivel stud made from steel. Black.

Made to strict military specifications. These high quality components will provide excellent fit and reliable function in your AR series rifle and are perfect for upgrading existing components or replacing worn or broken parts.

This carbine stock is designed for use with mil-spec sized buffer tubes. The streamlined A-frame design prevents snagging on clothing or equipment and shields the release latch to help prevent accidental collapse.

Sig P320 9/40 extended base pads are CNC machined from aluminum and hard anodized. This lengthens the magazine .375" to make for easier, more reliable magazine changes. They also allow you to use a magwell without adding capacity to the magazines.

 Factory replacement 'O' ring for your Hatsan 12 gauge semi-auto shotgun.

Designed to hold multiple cartridges together as a unit for simultaneous insertion and extraction from a revolver cylinder.

Avoid the sharp edges of your 1913 Picatinny rail with these low profile ladder style panels from Magpul. One panel per package fits one side of a carbine length rail and is easily cut to shorter lengths.

1/2" wood screw swivel studs sold individually.

This part is a Remington factory OEM part. Made to the same factory specifications, materials and standards as the parts in your firearm. This magazine cap features a swivel assembly.

Made from precision cast steel that is Melonite treated for wear and corrosion resistance. Dedicated fit for the Magpul SGA Stock, the Receiver Sling Mount can be installed on either the left or right side of the front of the stock.

Mil-spec part. Great for new builds or replacing worn parts.

Specially formulated to adhere to your firearm, this Uncle Mike's Gun-Tite stays secure until you decide to remove the item with the use of some hand tools.