Hornady Primer Pocket Reamer is an accessory that will make cleaning much easier. This piece of gunsmith and reloading equipment allows you to free GI brass from primer pocket crimp.

The ergonomic Lock-N-Load® Quick Change Hand Tool features a dual-sided chuck that allows for the quick changeover of popular case preparation tools like chamfer, deburr, primer pocket reamers and cleaners, brushes or other tools with 8-32 threads.

Lee 308 WIN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud. Trim to length 1.995 to 2.015 inches.

Lee 270 WIN Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim. Trim to length 2.520 to 2.540 inches.

Lee 7MM REM MAG Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud. Trim to length 2.480 to 2.500 inches.

Removes military crimps and rough metal edges from a primer pocket. Essential accessory tool. Comes with molded handle. Available in large or small sizes. Lyman’s Primer Pocket Reamer is a reloading tool that will decrimp military brass with ease.

This reloading system is a patented quick change bushing system letting you change dies with a simple flick of the wrist. With Lock-N-Load technology in your reloading press, you can stop loading, change dies and start loading another calibre in seconds.

Caliber: .33 Winchester , .38-56 WCF , .45-70 Government , .348 Winchester

Lee #8 Priming Tool shell holder used in Lee hand priming tools. For the 33 Win, 348 Win, 40/65, 45/70 and similar cases

RCBS offers a variety of decapping pins for all reloading needs. Headed pins are for most current production expander-decapping and decapping rods.

These replacement decapping units feature an expander rod, expander ball, and decapping pin. They are used in sizing dies to de-prime the case and expand the case neck in bottleneck cartridges. It is always a good idea to keep an extra decapping unit on-hand so you can ensure your reloading sessions do not get interrupted if you ever damage them during use. Factory Replacement Part Precision Machined to ensure concentricity Expander Rod, Expander Ball and Decapping Pin .264/6.5mm Note: Not for use with 6.5 Creedmoor; for 6.5 Creedmoor use part number 9839

Lee 300 WIN Mag Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim

Clean primer pockets promote uniform primer seating. Cleans fouling from primer pocket bottoms. Molded handle included.

Small pins are for pre-1990s collet-style rods designed for small-primer cartridges as well as for current competition-style dies/rods, X Die mandrels, PPC and .357 Sig.

Large pins are designed for collet-style rods for large primer cartridges, as well as for current competition-style dies/rods, 7 TCU and 35 Whelen.

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses.

Our shell plates feature a subtle radius on each shell holder mouth to ensure smooth and reliable functioning. The retainer spring is designed to stay in place when inserting cases into the shell plate.

Replace broken or worn decapping pins with these factory components from Lyman. Each pin is carefully crafted from high quality steel to ensure correct fit and flawless function. These pins will work to replace any age Lyman decapping pin.

Works well with Blackhorn 209, Pyrodex® Pellets, and loose powder!

Shell plates feature a subtle radius on each shell holder mouth to ensure smooth and reliable functioning. The retainer spring is designed to stay in place when inserting cases into the shell plate.

Shell plates feature a subtle radius on each shell holder mouth to ensure smooth and reliable functioning. The retainer spring is designed to stay in place when inserting cases into the shell plate.

Everything you need for quick loading in one package. This one tool does it all: carries your powder, your cap, your projectile and serves as your bullet starter. Works well with round balls, conicals or sabots.

The Thunder Nipples use an 8mm thread that tapers at the end to lock into the Thunder Dome breech plug. This magnum ignition system assures you a torch-like flame to ignite the powder. When using the 209 adaptor, you must use the magnum hammer.

A synthetic based lube that withstands the high operating temperatures of muzzleloaders to prevent fouling residue from binding breech plugs. Also works well on nipples and shotgun choke tubes. 1/2 oz. Tube with applicator tip.

Solid brass body carries 15 No. 11 percussion caps. Protects the caps and dispenses them one at a time.

Starts patched round balls, conical bullets and saboted bullets. Classic, hand filling round handle. Wide flanged, contoured starter tips. Hole for lanyard.

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.

Our shell plates feature a subtle radius on each shell holder mouth to ensure smooth and reliable functioning. The retainer spring is designed to stay in place when inserting cases into the shell plate.

Hornady Sure-Loc Lock Rings fit on standard 7/8 -14" threaded dies and accessories. Splint ring design die lock rings applies constant pressure and wrench flats for easy on/off.

Precision machined from solid steel and heat-treated to perform flawlessly. Wide mouth and rounded edge at the opening allow smoother case insertion.

Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy.

Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy.